Netboard A10 GEN2
PERFORMANCE, QUALITY, FUNCTIONALITY
Dutch Engineering – Made in The Netherlands
The NETBOARD A10 Revison 2.0.3-CN is an embedded mainboard intended for demanding 24/7 applications. The board is designed with integrated programmable DC-DC power supply and automatic inrush current limiter. It has a wide range voltage input (7-24VDC) and can react to input voltage changes within milliseconds over its full range. The A10 is a fixed BOM solution using only components from respected manufacturers and a high quality bare board with controlled stack-up. The board has been designed and is produced in The Netherlands.
AVAILABLE AS OEM PRODUCT (Minimum Order Quantity 100PCS)
SPECIFICATIONS
| Hardware Specifications | |
| CPU Model E | AMD Embedded GX-416RA G-Series SOC (4x 1.65Ghz, L2 cache 2MB, 15W, No GPU) |
| CPU Model F | AMD Embedded GX-210UA G-Series SOC (2x 1.0Ghz, L2 cache 1MB, 8.5W, No GPU) |
| CPU Model G | AMD Embedded GX-420MC G-Series SOC (4x 2.0Ghz, L2 cache 2MB, 17.5W, No GPU) |
| DRAM | UDIMM DDR3 (Model E & G have 2 sockets), total memory capacity max. 32GB (Model F 16GB), ECC & Non ECC supported |
| Chipset | Integrated in SoC (single-chip) |
| Ethernet | Model E/G: 4x Intel® i210, Model F: 3x Intel ® i210 |
| Hardware acceleration | SoC has integrated AESNI instructionset including support for GCM |
| Standard I/O Interfaces | |
| uSD card socket | |
| 3 x USB 2.0 (2 on header, 1 external port) | |
| 2x miniPCI socket (1x mSATA, m-PCIe and USB 2.0 & 1x mSATA, USB3.0 and optional SIM card support ) | |
| 1 x Serial Console with integrated usb serial converter on miniUSB B port | |
| 1 micro switch configured as power button (can also be configured as GPI or reset button by component placement) | |
| 2 x SATA 3 (shared with mSATA sockets / auto sensing) + mini power header (JST) | |
| BIOS Features | 64 MBit serial SPI firmware flash with Coreboot & SEABIOS |
| Power Management | ACPI 3.0 (With 5V power rail always active / S3 Sleep state not support by current BIOS) |
| Operating Systems | Linux, FreeBSD, Windows, others OS support upon request available |
| Power Supply | External 12V [wide range capable 7-24VDC] |
| Optional I/O interfaces | 1 x PCIe x8 or x4 Edge Connector (Electrical x4) , shared with first miniPCIe socket (auto sensing) |
| DC-in on header for systems with integrated power supply | |
| internal USB 3.0 port (upright) | |
| SIM card socket | |
| Dimensions | |
| Width x Length (mm) | 185 x 140 |
| Width x Length (inches) | 7.28 x 5.51 |
| Form Factor | Proprietary Network Board |
| Environment | |
| Power Requirements | 7-24VDC (12VDC is required if PCIe edge connector is used) |
| Maximum Current (@ 12VDC) | 3A |
| Power Consumption (Typical) | Model E: 20W, Model F: 15W, Model G: 25W |
| Heat Dissipation (Typical in BTU/hr) | Model E: 68.3, Model F: 51.2, Model G: 85.3 |
| Operating Temperature | 0 to +45°C (depends on applied cooling solution / value assumes default heatsink + standard fan) |
| Storage Temperature | -20 to +70°C |
| Humidity | 10-90% non-condensing |
| Regulatory Compliance | FCC part 15 Class A, CE, Rohs |