Netboard A10 GEN2

PERFORMANCE, QUALITY, FUNCTIONALITY
Dutch Engineering – Made in The Netherlands

The NETBOARD A10 Revison 2.0.3-CN is an embedded mainboard intended for demanding 24/7 applications. The board is designed with integrated programmable DC-DC power supply and automatic inrush current limiter. It has a wide range voltage input (7-24VDC) and can react to input voltage changes within milliseconds over its full range. The A10 is a fixed BOM solution using only components from respected manufacturers and a high quality bare board with controlled stack-up. The board has been designed and is produced in The Netherlands.

netboard_a10_v2-001

AVAILABLE AS OEM PRODUCT (Minimum Order Quantity 100PCS)

SPECIFICATIONS

Hardware Specifications
CPU Model E AMD Embedded GX-416RA G-Series SOC (4x 1.65Ghz, L2 cache 2MB, 15W, No GPU)
CPU Model F AMD Embedded GX-210UA G-Series SOC (2x 1.0Ghz, L2 cache 1MB, 8.5W, No GPU)
CPU Model G AMD Embedded GX-420MC G-Series SOC (4x 2.0Ghz, L2 cache 2MB, 17.5W, No GPU)
DRAM UDIMM DDR3 (Model E & G have 2 sockets), total memory capacity max. 32GB (Model F 16GB),  ECC & Non ECC supported
Chipset Integrated in SoC (single-chip)
Ethernet Model E/G: 4x Intel® i210, Model F: 3x Intel ® i210
Hardware acceleration SoC has integrated AESNI instructionset including support for GCM
Standard I/O Interfaces
uSD card socket
3 x USB 2.0 (2 on header, 1 external port)
2x miniPCI socket (1x  mSATA, m-PCIe and USB 2.0 & 1x  mSATA, USB3.0 and optional SIM card support )
1 x Serial Console with integrated usb serial converter on miniUSB B port
1 micro switch configured as power button (can also be configured as GPI or reset button by component placement)
2 x SATA 3 (shared with mSATA sockets / auto sensing) + mini power header (JST)
BIOS Features 64 MBit serial SPI firmware flash with Coreboot & SEABIOS
Power Management ACPI 3.0 (With 5V power rail always active / S3 Sleep state not support by current BIOS)
Operating Systems Linux, FreeBSD, Windows, others OS support upon request available
Power Supply External 12V [wide range capable 7-24VDC]
Optional I/O interfaces 1 x PCIe x8 or x4 Edge Connector (Electrical x4) , shared with first miniPCIe socket (auto sensing)
DC-in on header for systems with integrated power supply
internal USB 3.0 port (upright)
SIM card socket
Dimensions
Width x Length (mm) 185 x 140
Width x Length (inches) 7.28 x 5.51
Form Factor Proprietary Network Board
Environment
Power Requirements 7-24VDC (12VDC is required if PCIe edge connector is used)
Maximum Current (@ 12VDC) 3A
Power Consumption (Typical) Model E: 20W, Model F: 15W, Model G: 25W
Heat Dissipation (Typical in BTU/hr) Model E: 68.3, Model F: 51.2, Model G: 85.3
Operating Temperature 0 to +45°C (depends on applied cooling solution / value assumes default heatsink + standard fan)
Storage Temperature -20 to +70°C
Humidity 10-90% non-condensing
Regulatory Compliance FCC part 15 Class A, CE, Rohs